semi-rigid, cnc bending, rf cables

	Resources


Fed up with cable vendor troubles, and overstated capabilities? Visiting San Jose, or the Bay Area? Why not make time for a Site Survey? Put us on your calendar. Seeing is believing! Testing up to 65 GHz with TWO V-Band VNAs Testing 40 MHz to 65 GHz is performed using our Anritsu models 37397A and 37397C Vector Network Analyzers, both 40 MHz to 65 GHz, and both with high-speed time domain to accommodate phase matching. Testing from 1 MHz For your special requirements we offer swept frequency testing to as low 1 MHz and in both 50 and 75 Ohms made possible with our Wiltron 5409A, Scalar Measurement System (most VNAs bottom at 22.5 or 40 MHz, and most scalar systems bottom at 10 MHz). We have you covered to 1 MHz. Phase Matching Optional phase testing is performed using any of our two state-of-the-art Anritsu "Lightening" 37000 series Vector Network Analyzers, equipped with high speed time domain.

RF COAX INC. is located directly across the street from the Hollister Municipal Airport at the Northpointe Business Park. Our reception lobby is located at 1725 San Felipe Drive, Suite 3, Hollister, CA 95023 (map). We also occupy Suite 4 (manufacturing). We are just 45 minutes South of downtown San Jose, CA, the heart of the Silicon Valley. As a US based company operating in the Silicon Valley RF COAX INC. is easy to do business with. Our phones are staffed extended hours to receive calls from the East coast and Europe.

Test Capability that is unrivaled among RF Cable Manufacturers Featuring Anritsu VNAs, Factory Calibrated Standards, Custom Test Stations

Meiji Optics, Schott-Fostec Illuminators, 18 Assembly Benches Total CERTIFIED: IPC J-STD-001 Every Assembler, and Inspector is an IPC Certified Application Specialist, including Lead-Free Hand-Soldering certification.

	Three CNC Benders Three benders on-hand means, "No Excuses" manufacturing. Our three identical Pines model 106 automatic tube benders are specially designed to produce accurate and precise bends in semi-rigid coax, from 0.047" to 0.250" diameter Up 32 bends per cable are possible. Drop-in cables for airborne applications our specialty.

	Cut-Off Saw. Ask the competition what they use to cut fragile semi-rigid RF cables. A saw based on a sewing machine motor combined with a yardstick is usually the sorry answer. We offer a custom-built mission specific 4-inch pneumatically powered saw. Featuring hands free cutting and a built in 6-foot digital caliper. The 4.25 floppy provides an idea of the tiny scale. One serious machine!

	Two SR 1000's Our Schleuniger SR 1000 Swiss-engineered cable strippers are the ideal compliment to our CNC benders. Developed exclusively for semi-rigid cable end-prep; there is positively nothing better available anywhere on the market, or at any price!. The key to precision assembly and phase matching. The SR 1000 "machines" off the outer conductor and simultaneously points the center conductor as needed. We also buy pre-owned machines.

	Automatic Dielectric Withstanding Voltage Testing. Our Associated Research Model 3500s are readily programmable via the front panel. All RF Cables are tested!

	Preconditioning is done in strict accordance with MIL-C-17G section 6.6. Our Tenny T2RC Environmental Test Chamber is capable of simulating a wide range of temperature and humidity conditions from -75 to +200 deg. C and from 20% to 98% R.H. A truly modern chamber complete with humidity water recovery for unattended continuous operation, and PC data communications software for ease of operation and data logging.

	For more rapid cooling our Ransco Dispatch chamber is cooled by the injection and evaporation of LN2 liquefied nitrogen gas. It may also be used in combination with our Tenny T2RC chamber when thermal shock testing is required.

	ISO 9001:2000 Our Quality Policies Manual fully conforms to ISO 9001:2000 J-STD-OO1D Inspections are performed in full accordance with the J-STD-OO1D


PRECISE TECHNIQUES COMBINED WITH AUTOMATION as always, is the key to quality and value. Compare RF COAX to other cable houses. We use nothing but the very best automatic assembly equipment from Schleuniger and Pines, the best hand tooling from Huber&Suhner and Daniels, top test equipment from Agilent and Anritsu, the best machine tooling and gages from, Hardinge, Mitutoyo, and Maury just to name just few. There is no better equipment available and RF COAX has it all because you can afford no less than the best that technology has to offer.

RF COAX INC. The SemiRigid pioneers...www.SemiRigid.com www.Semi-Rigid.com RF COAX™ is a trademark of RF COAX INC. K Connector®, V Connector®, and W Connector® are registered trademarks of Anritsu Company. GPO® & GPPO® are registered trademarks of Corning Gilbert. All trademarks are the property of their respective owners. US COAX uscoax.com, Digital Coax digitalcoax.com, Space Cables spacecables.com, phasematch.com, rf-cables.com, semirigid.com, semi-rigid.com, semirigidcables.com, are associated with RF COAX INC...Discover the Solution... discoverthesolution.com